Home Tips & Tricks 1995 – 1997 Volkswagen B4 Wheel bearing, suspension strut – Plus suspension...

1995 – 1997 Volkswagen B4 Wheel bearing, suspension strut – Plus suspension removing and installing

70
Download 90 Nm + 45 ° ( 1 / 8 ) additional turn. loosening and tightening Remove any paint residue and/or corrosion in the threads of outer joint before screwing on nut. 3 – Phillips-head screw 4 – Brake disc Notes for repairing 5 – Brake caliper Do not remove brake hose when working on front wheel suspension Hang with wire or similar means Replace brake pads 6 – Metal countersunk screw 7 – Wheel hub Pressing out Pressing in Remove bearing inner race 8 – Rotor for speed sensor Only on vehicles with ABS Front brakes – brake caliper Girling, servicing Brake pads, removing and installing 9 – Hex bolt, 10 Nm 10 – Cover plate 11 – Securing ring Check for proper seating 12 – Wheel bearing Pressing out Replace, destroyed during ejection Pressing in 13 – Self-locking hex nut, 35 Nm 14 – Wheel bearing housing 15 – Ribbed bolt, 125 Nm 16 – Drive axle Removing and installing Servicing 17 – Multipoint socket head bolt, 45 Nm 18 – Hex bolt Camber setting Drive axle with triple rotor joint, removing and installing Drive axle, servicing Camber of front wheels, adjusting Mark installation position before loosening 19 – Hex bolt 20 – Bracket 21 – Stop 22 – Self-locking hex nut, 60 Nm unbolt and bolt in 23 – Suspension strut Disassembling and assembling 24 – Self-locking hex nut, 95 Nm 25 – Tie rod Removing and installing Front suspension strut – Basic/Plus suspensions, servicing Tie rod – power steering gear, TRW and ZF, removing and installing