Home Tips & Tricks 2006 BMW 330Ci STEERING WHEEL Removal & Installation

2006 BMW 330Ci STEERING WHEEL Removal & Installation

47
Download Remove AIRBAG unit. See appropriate AIRBAG RESTRAINT SYSTEMS article. 2. Move steering wheel/wheels to straight ahead position. Release screw and remove steering wheel. SeeFig. 29 . 3. If replacing steering wheel, transfer switch unit. 4. To install, reverse removal procedure. Ensure wheels are in straight ahead position. Fit steering wheel.Markings on steering wheel and steering spindle must match up. See Fig. 30 . 5. Tighten screw to specification TRIM PANEL FOR PEDAL ASSEMBLY Removal & Installation 1. Move steering column upwards to maximum possible position. 2. Release screws (1) and expansion rivets (2). Unlock rotary clip (3) by turning through 90°. See Fig. 31 . 3. Unlock left and right retaining clips (1) and fold trim (2) down. See Fig. 32 . 4. Remove and feed out footwell light (1). Disconnect plug connection (2) from gong. Release lock (3) andpress out plug (4) through opened On-Board Diagnosis (OBD) socket. See Fig. 33 . 5. If replacing, release locks (5) and remove OBD socket (6). See Fig. 33 . 6. If replacing, unlock gong (1) and remove from trim (2). See Fig. 34 . 7. To install, reverse removal procedure