Home Tips & Tricks 2004 Pontiac Montana Trim Panel Replacement – Side Front Door

2004 Pontiac Montana Trim Panel Replacement – Side Front Door

60
Download Removal Procedure 1. Open the door. 2. Remove the front door trim plate. Refer to Door Trim Plate Replacement () . 3. Remove the front door manual window regulator handle if equipped. Refer to Window Regulator Handle Replacement – Door Remove the armrest screws. Route the electrical harness through the front door trim panel opening. Use J 38778 in order to remove the front door trim panel from the door. Use J 38778 in order to pry the front door trim panel from the door frame at the window seal. 8. Remove the front door trim panel from the door. 4. 5. 6. 7. Installation Procedure 1. Install the front door trim panel to the front door. 2. Place the window seal portion of the panel over the door frame. 3. Route the electrical harness through the front door trim panel opening and into place. 4. Align the front door trim panel retainers to the holes in the door metal. 5. Firmly press the front door trim panel to the door metal in order to seat the retainers. Notice: Refer to Fastener Notice in Cautions and Notices. 6. Install the armrest screws. Tighten the screws to 3 N.m (26 lb in). 7. Install the front door manual window regulator handle if equipped. Refer to Window Regulator Handle Replacement – Door 8. Install the door trim plate. Refer to Door Trim Plate Replacement () . 9. Close the door.