Home Tips & Tricks 2006 AUDI A3 IN DASH (RADIO) INSTALLATION KIT

2006 AUDI A3 IN DASH (RADIO) INSTALLATION KIT

83
Download 1. Using DT2 radio removal tools, remove the factory radio. Disconnect and remove. 1. Mount the aftermarket DIN stereo in the factory radio opening with the radio’s supplied mounting sleeve, but do not bend any mounting tabs. Do not use the stereo’s trim ring. If your radio has a permanent trim ring, it will have to be cut off to use the AU2392 Kit. 2. Snap the AU2392 panel into the radio and check for proper faceplate clearance. The installation should appear as an ISO mount. If the radio is set too far back, then use the Scosche DIN trim ring included with this kit around the radio’s mounting sleeve to space outward. 3. Once the positioning is correct, then make all wiring connections and mount radio permanently. INTRODUCTION / PRELIMINARY 2 This premium installation kit is for 2006 Audi A3 vehicles. Included are all the parts you need to mount your car stereo/cassette or CD player into your vehicle’s dash. Refer to the individual instruction in this manual to remove your vehicle’s factory radio and assemble the kit. CAUTION: