Download 2004 installations Acura MDX Brake System Bleeding : NOTE: Don’t reuse the drained fluid. Use only clear ACURA DOT three Brake Fluid from an unopened container. Utilizing a non-Acura brake fluid may cause corrosion and shorten the life of the system. Do not mix different brands of brake fluid; they will not be compatible. Ensure no grime or other international matter is allowed to contaminates the brake fluid. Do not spill brake fluid on the vehicle, it could damage the paint; if brake fluid does contact the paint, wash it off instantly with water. The reservoir on the master cylinder have to be on the MAX (higher) degree mark initially of the bleeding procedure and checked after bleeding each brake caliper. Add fluid as required. 1. Be sure that the brake fluid stage within the reservoir is on the MAX (upper) level line (A). 2. Slide a piece of clear plastic hose over the primary bleed screw, and submerge the opposite finish in a container of latest brake fluid.