Home Tips & Tricks 2005 Porsche 911 GT3 Removing and installing battery

2005 Porsche 911 GT3 Removing and installing battery

96
Download 1.1 Unclip and remove cap. 1.2 Unlock ground connection for battery and pull it off. 2. Removing support strut for side radiator on right. 2.1 Cut through tie-wraps for securing electrical lead to support strut. 2.2 Unscrew three fastening screws -4- for support strut and remove it. 3. Removing battery holder. 4.1 Remove battery from holder. 4.2 If necessary, use a large screwdriver to carefully lever out battery from the holder. 5. Disconnecting positive terminal. 5.1 Undo screw connection of positive terminal -5- and detach the cable. 6. Disconnecting the negative terminal. Pull battery forward about halfway, undo screw connection of negative terminal -6- and detach the cable. 6.2 Pull off vent hose on battery. 6.3 Risk of causticization! Pull battery fully out by folding handles, if possible without tilting, and remove it through wheel housing.