Home Tips & Tricks 2000-2004 Toyota Avalon Installation Instructions

2000-2004 Toyota Avalon Installation Instructions

70
Download 2000-2004 Toyota Avalon Installation Instructions – KIT FEATURES • Double DIN Radio Provision • Stacked ISO Mount Units Provision A) Double DIN Trim Plate KIT COMPONENTS TOOLS REQUIRED: Small Flat Blade Screwdriver • Panel Removal Tool • Phillips Screwdriver • Socket Set DASH DISASSEMBLY (column shift models) 1. Disconnect the negative battery-terminal to prevent an accidental short circuit. 1 Unsnap the trim below the climate control to reveal (2) 10 MM bolts and remove. (Figure A) 2 Carefully pull air vents above radio towards rear of car to unsnap. NOTE: There are (3) snaps, (2) are at the bottom sides and (1) is at the top middle of the vent assembly. (Figure B) 3 Remove (2) 10 MM bolts from above radio/climate control assembly. Unplug and remove assembly together. (Figure C) 5 Remove (6) Phillips screws (4 from radio and 2 from climate control) from each side bracket to separate radio and climate control. (Save climate controls and brackets to reuse during kit assembly). (Figure D