Home Tips & Tricks PEUGEOT DISPLAY DRIVER AND STALK ADAPTER Fitting instructions

PEUGEOT DISPLAY DRIVER AND STALK ADAPTER Fitting instructions

62
Download TROUBLE SHOOTING GUIDE (1) The display does not show the radio information. – Reset the head unit using the recessed front panel button (see user manual) – Check the uni-link plug is fitted to the rear socket of the head unit. – Check the 14pin plug is installed into the adapter. – Check the connections to the adapter and head unit. – Check that the connection to the head unit remote power has been made (Step 5) – Consult your supplying dealer. (2) The steering wheel controls do not operate the head unit. – Reset the head unit using the recessed front panel button (see user manual) – Check that the 3.5mm jack plug is fitted into the 3.5mm socket of the head unit. – Check the correct fitting of the 14pin plug to the adapter. – Check for broken or loose wiring within the supplied harness. – Consult your supplying dealer. (3) The head unit does not operate after installation. – Reset the head unit using the recessed front panel button (see user manual) – Check all connections are pushed fully into the rear terminal block on the car head unit. – Check that there are no broken pins on the lead or rear terminal. – Check the supply fuse to the head unit. – Consult your supplying dealer.