Home Tips & Tricks 2008 QX56 REAR DISC BRAKE BRAKE PAD : Exploded View

2008 QX56 REAR DISC BRAKE BRAKE PAD : Exploded View

62
Download BRAKE PAD : Removal and Installation of Brake Pad REMOVAL 1. Remove tires from vehicle with power tool. 2. Remove mounting bolt from the top mount. 3. Swing cylinder body open, and remove pads. INSTALLATION 1. Push piston in so that pad is firmly attached and mount cylinder body to torque member. NOTE: Using a commercially available disc brake piston tool, makes it easier to push in the piston. CAUTION: By pushing in piston, brake fluid returns to master cylinder reservoir tank. Watch the level of the surface of reservoir tank. 2. Apply Molykote M-77 grease to knuckle slide where brake pad contacts. CAUTION: Do not get grease on the brake rotor friction surface.