Home Tips & Tricks EC Rearview Mirror Service Manual ‘09 Toyota Highlander

EC Rearview Mirror Service Manual ‘09 Toyota Highlander

61

Download EC REARVIEW MIRROR Service Procedure 1. Remove Battery Cable. (a) Protect fender before starting. (b) Do not touch the positive terminal with any tool when removing cable. (c) Remove the negative battery cable. (Fig. 1-1) 2. Vehicle Disassembly. (a) Remove the OE mirror. (1) Disengage the two claws and remove the mirror cover from the mirror base. (Fig. 2-1) (2) Pull the lever in the direction indicated by the arrow shown in the illustration and slide the inner rear view mirror assembly upward to remove it. (Fig. 2-1) (b) Using panel removal tool remove overhead console from headliner. (Fig. 2-2) (1) Disconnect any connectors connected to the overhead console. 3. Install T-taps. (a) Locate the disconnected 22-pin overhead console connector. (Fig. 3-1) (b) Peel back or cut approximately one inch of the wire cover. (Fig. 3-2) (c) Locate the LIGHT GREEN wire in pin #9 on the 22-pin connector. (Fig. 3-3) (d) Attach T-tap connector to LIGHT GREEN wire (pin #9) on the 22-pin connector with needle-nose pliers about 1 inch from the connector. (Fig. 3-4) (1) Ensure both halves of T-tap connector are snapped together. (e) Locate the LIGHT GREEN/RED (or WHITE/BLACK) wire in pin #2 on the 22-pin connector. (Fig. 3-5)