Home Tips & Tricks 2000 Ford Crown Victoria Intake Manifold Gasoline Engines Removal

2000 Ford Crown Victoria Intake Manifold Gasoline Engines Removal

140
Download Removal 1. Disconnect the battery ground cable. For additional information, refer to Section 414-01. 2. Drain the engine cooling system. For additional information, refer to Section 303-03. 3. Remove the air cleaner outlet tube. For additional information, refer to Section 303-12. 4. Disconnect the fuel line. For additional information, refer to Section 310-00A or Section 310-00B. 5. Remove the wiper arm and pivot shaft. For additional information, refer to Section 501-16. 6. Remove the drive belt. For additional information, refer to Section 303-05. 7. Raise the vehicle on a hoist. For additional information, refer to Section 100-02. 8. Disconnect the electrical connector at the crankshaft position (CKP) sensor. Disconnect the pin-type retainer from the A/C compressor bracket. 9. Disconnect the electrical connector from the A/C compressor. 10. Remove the oil bypass filter. 11. Disconnect the oil pressure sensor electrical connector and the power steering pressure (PSP) switch electrical connector. 12. Disconnect the exhaust gas recirculation (EGR) tube from the exhaust manifold.