Home Tips & Tricks 2004 BMW Z3 Brakes Disc Installation Instructions

2004 BMW Z3 Brakes Disc Installation Instructions

77
Download Raise and support vehicle. Remove wheel(s). 2. Remove axle shaft. See appropriate AXLE SHAFTS article. 3. Remove brake disc. See BRAKE DISC . 4. Screw special tool 33 2 116 onto drive flange with wheel studs. Drive out drive flange with special tool33 4 201/202/203. See Fig. 33 . 5. If necessary, remove inner bearing race using special tool 00 7 500/33 1 307. See Fig. 45 . For Z3 2.8 seeFig. 46 . 6. It may be necessary to remove inner wheel bearing race with the following procedure: ● Detach wheel bearing inner race with special tool 33 4 400 through groove in bearing inner race. ● According to outside diameter of bearing inner race, use special tool 33 4 401 with: 33 4 405 for dia. 45-51 mm, 33 4 406 for dia. 50-55 mm and 33 4 407 for dia. 55-61 mm in groove. See Fig. 35 . ● Tension special tool 33 4 401 with wrenches 33 4 403 and 33 4 404 until it can still just be turned in groove. See Fig. 36 .