Download Removing Open convertible top. Remove side trim –> 70 – INTERIOR TRIM Remove loudspeaker. Remove outer window recess seal. Fig. 457: Identifying Loudspeaker And Outer Window Recess Seal Remove upper retaining plate.Raise door window until combination nuts of door window are visible in installation opening – arrow -. Remove combination nuts. Lower side window to center position until combination nuts are visible in installation opening – arrow -. Remove combination nuts. Tilt side window toward inside and remove upward from window recess. Installing Installation is performed in the reverse order of removal. NOTE: Side window, adjusting When installing, check side window adjustment. Side trim, loudspeaker removed and convertible top closed. NOTE: Observe that flushness and joint between door window and side window is guaranteed. If side inclination (side distance) is not suitable, it can be corrected via adjuster at carrier plate.