Home Tips & Tricks 1994 Mazda 626 TIMING BELT REMOVAL / INSTALLATION

1994 Mazda 626 TIMING BELT REMOVAL / INSTALLATION

68
Download 1.Disconnect the negative battery cable.2.Remove the camshaft position sensor and crankshaft position sensor.3.Remove the spark plug.4.Remove the P/S oil pump and bracket with the oil hose still connected.5.Remove in the order indicated in the table. 6. Install in the reverse order of removal. 7.Verify the air gap.8.Start the engine and(1) Inspect for the pulleys and drive belt for runout and contact. (2) Verify the ignition timing.