Home Tips & Tricks 2000-01 MANUAL A/C-HEATER SYSTEMS Blazer, Jimmy, Sonoma & S10 Pickup

2000-01 MANUAL A/C-HEATER SYSTEMS Blazer, Jimmy, Sonoma & S10 Pickup

65
Download BLOWER MOTOR RESISTOR Removal Procedure (C42) 1. Disconnect the electrical connector (3). 2. Remove the blower motor resistor mounting screws (1). 3. Remove the blower motor resistor (2) from the blower case. Fig. 3: Identifying Blower Motor Resistor Assembly (C42) 1. Install the blower motor resistor (2) to the blower case. 2. Install the blower motor resistor mounting screws (1). Tighten Tighten the screws to 1.9 N.m (17 lb in). 3. Connect the electrical connector (3).