Home Tips & Tricks 1998 Mercedes Benz SLK 230 DTCM – Diagnostic Trouble Code Memory

1998 Mercedes Benz SLK 230 DTCM – Diagnostic Trouble Code Memory

78
Download Do not connect battery trickle charger. Risk of Injurywhen performing diagnostic tests and repairs on components of the SRS system. Store both airbags and side airbags with opening surface pointing upward. Do not expose to temperatures above 100°C . Preliminary work: Diagnosis – Function Test. See: FT – Function Test Preparation for DTC Readout : 1. 2. 3. 4. 5. Review DTC Memory and Actual Values. Fuses OK. Battery voltage 11 – 14 V SRS MIL (A1e15) illuminates. Connect Hand-Held Tester (HHT) as per connection diagram and readout DTC memory. WARNING: Interrupt any electrical current from reaching the airbag unit. NOTE: As of 07/93, diagnostic trouble codes (DTC’s) can only be read out and erased using the Hand-Held Tester (HHT). Determine MB number of the SRS control module via HHT (See DTC Chart). The SRS control modules beginning with the number 000, the fault code 1 is valid. Those beginning with 001, the fault code 2 is valid. NOTE : When installing additional accessories, observe harness clearances near SRS sensor lines. Test equipment : Hand-Held Tester (HHT) (Available through the MBNA Standard Equipment Program.)