Home Tips & Tricks Audi A4 Transmission Mount Installation Overview

Audi A4 Transmission Mount Installation Overview

34
Download Tools Needed Floor Jack Jack Stands 13mm socket 16mm socket 17mm socket 16mm wrench 17mm wrench 10mm wrench Ratchet Blue loctite (optional) Step 1 Raise the car and secure it with jack stands. Never work under a car supported only by a hydraulic floor jack. Check your owner’s manual for proper placement of floor jacks and jack stands. Step 2 Identify the transmission mount. Some cars will have 1 while most will have 2. They are located just outboard from the transmission near the drive axles. Step 3 Carefully use a floor jack to support the transmission in position and prevent it from shifting positions. Step 4 Using a 13mm socket, remove the 2 side bolts. Depending on your specific model, there may be a heat shield around the mount which will need to be moved.