Home Tips & Tricks Wind Noise From Door Glass Window Run 07 Toyota Matrix

Wind Noise From Door Glass Window Run 07 Toyota Matrix

45

Download Front Doors Repair Procedure NOTE: Use the same procedure for the LH side as the RH side. 1. Place the window in the down position. 2. Remove the window run. Completely remove the double-sided tape remaining on the frame. 3. Thoroughly clean the door frame using a white body shop towel and Kent Acrysol. NOTE: Do NOT use red shop towels. These towels contain silicone. 4. Install the door glass window run. A. Position the glass run at the No. 2 and No. 3 corners of the door frame and then attach the middle part of the run. B. Insert the glass run into the window run channels. NOTE: – Do NOT apply water or lubricant to the glass run when inserting it into the door. – Make sure the glass run fits securely into the holes of the door frame. 5. Using a plastic pry tool, press the glass run into the upper portion of the door frame to securely adhere the double-sided tape. 6. Fully close the window. Rear Doors Repair Procedure NOTE: Use the same procedure for the LH side as the RH side. 1. Place the window in the down position. 2. Remove the door glass window run. Completely remove the double-sided tape remaining on the frame. 3. Thoroughly clean the door frame using a white body shop towel and Kent Acrysol.