Home Tips & Tricks 1998 Lincoln Town Car suspension system REMOVAL INSTALLATION

1998 Lincoln Town Car suspension system REMOVAL INSTALLATION

121
Download 1. Vent the air suspension system. WARNING: DO NOT REMOVE AN AIR SPRING UNDER ANY CIRCUMSTANCES WHEN THERE IS PRESSURE IN THE AIR SPRING. DO NOT REMOVE ANY COMPONENTS SUPPORTING AN AIR SPRING WITHOUT EITHER EXHAUSTING THE AIR OR PROVIDING SUPPORT FOR THE AIR SPRING TO PREVENT VEHICLE DAMAGE OR PERSONAL INJURY . 2. Turn the air suspension switch off. WARNING: BEFORE PERFORMING MAINTENANCE ON ANY AIR SUSPENSION COMPONENTS, DISCONNECT THE POWER TO THE SYSTEM BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED ON THE LH SIDE OF THE LUGGAGE COMPARTMENT TO PREVENT VEHICLE DAMAGE OR PERSONAL INJURY . 3. Raise and support the vehicle. 4. Remove the rear air spring retainer. 5. Lift the bottom of the air spring off the rear axle. 6. Remove the air spring. 1) Disconnect the electrical connector. 2) Push up on the air line retaining ring and disconnect the air line. 3) Remove the air spring. INSTALLATION To install, reverse the removal procedure. NOTE: