Download Depowering Procedure WARNING: Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module. This will reduce the risk of injury in the event of an accidental deployment. WARNING: Never probe the connectors on the air bag module. Doing so can result in air bag deployment, which can result in personal injury. WARNING: To reduce the risk of personal injury, do not use any memory saver devices. NOTE: If a seat equipped with a seat mounted side air bag and/or a safety belt pretensioner (if equipped) system is being serviced, the supplemental restraint system (SRS) must be depowered. NOTE: The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a supplemental restraint system (SRS) fault. NOTE: The SRS must be fully operational and free of faults before releasing the vehicle to the customer. 1. Turn all vehicle accessories OFF. 2. Turn the ignition switch to OFF. 3. Remove the RH kick panel cover and remove the restraints control module fuse F2.14 (10A) from the central junction box (CJB). For additional information, refer to the Wiring Diagram Manual.