Download Steering Column Disassembly 1. Disconnect battery ground cable (14301). Refer to Section 14-01. Wait one minute for air bag diagnostic monitor to deplete its stored energy. 2. Remove Steering Wheel (3600) as outlined. 3. Remove Steering Column from vehicle as outlined. 4. Remove steering column lower yoke (3N725), steering column upper bearing spring (3520), suspension height sensor control ring (3C131) and steering column bearing tolerance ring (3L539). Lower Steering Column Assembly 5. Remove turn indicator cancel cam (13318) by pushing up with flat-bladed screwdriver. Note direction of flush surface. 6. Remove two bolts retaining ignition switch (11572) and remove ignition switch assembly.