Home Tips & Tricks Exhaust System Service Manual '96 Subaru Outback

Exhaust System Service Manual '96 Subaru Outback

31
Download Exhaust System Service Manual ’96 Subaru Outback – FRONT CATALYTIC CONVERTER REMOVAL 1. Disconnect front oxygen sensor connector. 2. Lift-up the Vehicle. 3. Disconnect rear oxygen sensor connector. 4. Separate center exhaust pipe from rear exhaust pipe. 5. Remove bolts which hold front exhaust pipe onto cylinder heads. 6. Remove front exhaust pipe and center exhaust pipe from hanger bracket. CAUTION: Be careful not to pull down front exhaust pipe and center exhaust pipe. 7. Separate front catalytic converter from front exhaust pipe and center exhaust pipe. INSTALLATION CAUTION: Replace gaskets with new ones. 1. Install front catalytic converter to front exhaust pipe and center exhaust pipe. Tightening Torque: 30 ±5 N.m (22.4 ±3.6 ft-lb) . 2. Install front exhaust pipe and center exhaust pipe and temporarily tighten bolt which installs center exhaust pipe to hanger bracket. 3. Tighten bolts which hold front exhaust pipe onto cylinder heads. Tightening Torque: 30 ±5 N.m (22.4 ±3.6 ft-lb) . 4. Install center exhaust pipe to rear exhaust pipe. Tightening Torque: 18 ±5 N.m (13.0 ±3.6 ft-lb) . 5. Tighten bolt which holds center exhaust pipe to hanger bracket. Tightening Torque: 35 ±5 N.m (26.0 ±3.6 ft-lb) .