Download Rear Door Trim Panel Removal 1. Disconnect the battery ground cable. For additional information, refer to Section 414-01. 2. NOTE: Use care not to damage the trim panel when removing the screws. Remove the screws. 3. Remove the handle. 4. Remove the screws. 5. Remove the rear door trim panel. 6. Disconnect the electrical connector. 7. Disconnect the color-coded clips from the bracket. Installation 1. Connect the clips to the pull-strap. The silver retainer clip goes toward the front of the vehicle. The green retainer clip goes toward the rear of the vehicle. 2. Follow the removal procedure in reverse order.