Home Tips & Tricks 1994 Ford Explorer Exploded View Of Spindle & Components

1994 Ford Explorer Exploded View Of Spindle & Components

38
Download STEERING KNUCKLE Removal 1. Remove the spindle and steering shaft assembly. Refer to SPINDLE & SHAFT ASSEMBLY under REMOVAL & INSTALLATION. Disconnect steering linkage from steering knuckle. 2. Remove cotter pin and loosen ball joint nuts. Strike steering knuckle near ball joint to release ball joint. Remove ball joint nuts. Note position of camber adjuster on top of axle. See Fig. 9 . Remove camber adjuster and steering knuckle. CAUTION: Camber adjuster must be installed in original location to maintain proper wheel alignment. Installation To install, reverse removal procedure. Ensure camber adjuster is installed in original position. Install NEW nuts on ball joints. Install remaining components. BALL JOINT