Download 2003 Mazda Truck Tribute 2wd V6-3.0l Dohc Generator Removal And Installation 1. Disconnect the battery cables. Refer to BATTERY DISCONNECT. 2. Remove the right intermediate axle shaft. Refer to HALFSHAFT-FRONT. 3. Remove the right lower splash shield screws and the pin-type retainer. 4. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt. 5. Remove the nut and position the bracket and wiring harness aside. 6. Remove the generator electrical connectors. 1. Remove the B+ nut and cable. 2. Remove the connector. 7. Remove the upper generator mounting bolts. 8. Remove the lower generator bolts and position the generator aside. 9. Remove the generator mounting bracket bolts and remove the bracket. 10. Rotate the generator to gain clearance, and remove through the opening in the fender well. 11. To install, reverse the removal procedure.