Download Fig. 1: Identifying Front Bumper Components And Replacements REPLACEMENT HINT: The installation is in the reverse order of the removal. However, when there is a special point concerning the installation, it is indicated. 1. REMOVE ENGINE UNDER COVER NO. 1 a. Remove the 2 clips and 2 bolts. b. Remove the 2 screws and under cover. Fig. 2: Removing Engine Under Cover No. 1 2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSY LH a. Remove the 2 screws and 2 clips. b. Partially remove the splash shield. HINT: Do not remove the splash shield completely but partially so that the bumper cover can be removed. 3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSY RH HINT: Use the same procedures described for the LH side. 4. REMOVE FRONT BUMPER COVER a. Put protective tape under the front fender. b. W/Headlamp washer: 1. Remove the washer hose clip. 2. Using a screwdriver, pull out the front washer nozzle.