Download Removal Procedure 1. Remove the clutch master cylinder pushrod from the clutch pedal. 2. Remove the master cylinder retaining nuts at the front of the dash. 3. Remove the remote reservoir. 4. Disconnect the clutch actuator cylinder line. 5. Remove the clutch master cylinder assembly from the clutch pedal assembly. Installation Procedure 1. Install the clutch master cylinder assembly to the clutch pedal assembly. 2. Connect the clutch actuator cylinder line. 2005 Chevrolet Cavalier L4-2.2L VIN F 3. Install the remote reservoir. Notice: Refer to Fastener Notice in Service Precautions. 4. Install the master cylinder retaining nuts at the front of the dash. ^ Tighten the nuts evenly to 21 Nm (15 ft. lbs.). 5. Install the pushrod to the clutch pedal. 6. Bleed the hydraulic system.