Home Tips & Tricks Battery Service Manual 1999 Chrysler LHS

Battery Service Manual 1999 Chrysler LHS

59

Download Battery Service Manual 1999 Chrysler LHS – Battery Replacement REMOVAL 1. Turn the steering wheel all the way to the right. 2. Verify that the ignition switch and all accessories are OFF. 3. Disconnect and isolate the negative battery cable remote terminal from the remote battery post. 4. Remove air cleaner housing. 5. Remove battery splash shield. 6. Remove two short bolts to battery hold down. 7. Slide battery rearward to disconnect the negative and positive battery terminals from battery. 8. Slide battery toward rear of vehicle and lift out through wheel well opening. Negative Battery Cable Remote Terminal 9. Remove battery from vehicle. 1. Tighten clamp nuts to 8.5 N.m (75 in. lbs.) torque INSTALLATION For installation, reverse the above procedures. Inspect and clean battery and attaching components before installation. Warning: to protect the hands from battery acid, a suitable pair of heavy duty rubber gloves, not the household type, should be worn when removing or servicing a battery. Safety glasses also should be worn