Download Raise vehicle on ramps or hoist. 2. Remove existing m8 nuts from exhaust hangers. 3. Lift passenger side of hitch over muffler, forward of exhaust hanger. 4. By gently pulling down on the driver’s side muffler, slide the driver’s side of hitch over the tail pipe and forward into position. 5. Hitch will be mounted between heat shield and muffler exhaust hangers using existing studs. 6. With hitch in place, raise exhaust hangers back on their studs and start the m8 nuts (keep loose for now). 7. Place 1/2″conical washer in place then install 1/2″bolt. 8. Install 1/2″flat washer and nut. 9. Tighten m8 nuts and then the 1/2″fastener with torque wrench.