Home Tips & Tricks 1999 Mercedes Benz E 300TD Front Engine Mounts/Engine Brackets Removal

1999 Mercedes Benz E 300TD Front Engine Mounts/Engine Brackets Removal

119

Download 1 Detach charge air pipe (110) at radiator – Engine 605.960 in model 202, 605.962 in model 210 2.1 Detach fan shroud (7), place over viscous fan – Engine 111/604/605, 606.912 in model 208, 210 NOTE: Installation: Align fan shroud (7) to fan. 2.2 Detach fan shroud (7), take up and out – Engine 606.962 in model 210 2.3 Turn fan shroud ring (7a) out of the locking studs at the fan shroud (7) and remove – Engine 606 in model 124 Note: Installation: Ensure the fan shroud ring (7a) is correctly located in the locking studs of the fan shroud (7). 3 Unbolt intake manifold support (14) – Engine 111 with light alloy intake manifold 4 Remove shield of steering idler arm (5) at right engine mount – Engine 111.943/946/973 in model 170 – Engine 111.944/975/604/605 in model 202 – Engine 111.944/945/975 in model 208 5 Unscrew bolts of engine mount (11) at engine support Note: except engine 605.960 in model 202 right engine mount 6 Unscrew bolts of engine mount (12) at frame cross member – Model 140, on left and right 8 Unscrew bolts of engine mounts (12) at frame cross member and front axle carrier, respectively Raise engine at front lifting eye CAUTION: – Ensure that the injection line at the front engine lifting eye is not damaged and the rear of the engine does not touch the body. – Do not over-tension coolant hoses. – Model 170: Ensure the hose at the power steering pump is not over-tensioned, detach if necessary 9 Unscrew bolts of engine mount (11) at engine support – Model 140 left engine mount 10 Unbolt engine support (19) together with engine mount (2) at crankcase NOTE: