Home Tips & Tricks 2000 Ford Explorer PINPOINT TEST THE WASHER PUMP IS INOPERATIVE

2000 Ford Explorer PINPOINT TEST THE WASHER PUMP IS INOPERATIVE

153
Download CONDITIONS E1 CHECK THE IGNITION STATES — MONITOR THE GEM/CTM PID IGN_GEM DETAILS/RESULTS/ACTIONS Scan Tool E2 RETRIEVE THE DIAGNOSTIC TROUBLE CODES (DTCS) NOTE: If the vehicle is equipped with a manual transmission, depress the clutch while turning the ignition switch to start. Monitor the GEM/CTM PID IGN_GEM while turning the ignition switch through the START, RUN, OFF and ACC positions. Do the PID values agree with the ignition switch positions? Yes GO to E2. No REFER to Section 417-02. Retrieve and document continuous DTCs. Clear Continuous DTCs GEM/CTM Wiper/Washer Self-Test Are any DTCs recorded? Yes If DTC B1450, GO to E3 . If DTC B1453, GO to E3 . If DTC B1458, GO to E9 . If DTC B1460, GO to E9 . If DTC B1342, REPLACE the GEM/CTM; REFER to Section 419-10. CLEAR the DTCs. TEST the system for normal operation.