Home Tips & Tricks 2002 Chrysler Voyager INSTRUMENT PANEL ASSEMBLY

2002 Chrysler Voyager INSTRUMENT PANEL ASSEMBLY

170
Download REMOVAL 1. Disconnect and isolate the battery negative cable. 2. Remove the lower console: a. Remove six retaining screws. b. Pull rearward and disconnect the auxiliary power outlet. c. Remove lower console from vehicle. 3. Remove the bolts attaching the lower supports to the instrument panel frame (Fig. 3). 4. Remove the bolts attaching the lower supports to the floor pan. 5. Disconnect the wire connectors from the Passenger Airbag. 6. Remove the two screws to each right and left cowl trim covers. 7. Remove the both left and right side A-pillar trim covers using a trim stick (special tool #C-4755) or equivalent gently pry out on the trim covers and remove. 8. Remove the glove box: a. Push in on sides of glove box bin and lower door. b. Pivot glove box downward and disengage hinge hooks from instrument panel. c. Remove glove box from vehicle. 9. Disconnect the antenna lead connector from behind the glove box. 10. Remove the four screws to the lower steering column cover. 11. Remove the eight screws to the steering column backing plate. 12. Unclip the Data Link Connector (DLC) from the steering column backing plate. 13. Remove two screws to the left side instrument panel silencer and remove (Fig. 4). 14. Disconnect the left side wiring: