Home Tips & Tricks 2003 GMC Truck C 1500 INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT

2003 GMC Truck C 1500 INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT

143
Download REMOVAL PROCEDURE 1. Remove the instrument panel (I/P) cluster trim plate bezel. 2. Remove the screws that retain the I/P cluster to the I/P assembly. 3. Remove the I/P cluster (2) from the vehicle by tilting the bottom of the cluster outward. 4. Disconnect the I/P cluster harness (1) from the I/P cluster. INSTALLATION PROCEDURE 1. Connect the I/P cluster harness (1) to the I/P cluster (2). 2. Install the I/P cluster onto the I/P with the screws. Tilt the top of the cluster into the retainer first to avoid damaging the flexible circuit connections. 3. Install the screws that retain the I/P cluster to the I/P assembly. NOTE: Refer to Fastener Notice in Service Precautions. Tighten Tighten the screws to 2 N.m (18 lb in) . 4. Install the I/P cluster trim plate bezel. When the IPC is replaced, the new IPC will need to be programmed. See: Testing and InspectionProgramming and RelearningService Programming System (SPS)