Download Special tools and equipment – – – – VAG1331 torque wrench (5 to 50 Nm) D 176 404 A2 silicon sealant Drill with plastic brush attachment Scraping tool Removing – Remove noise insulation pan: – Drain engine oil. Note: Observe disposal regulations. – – – Unbolt oil pan. It may be necessary to loosen oil pan by hitting it lightly with a rubber mallet. Remove any remaining sealant from cylinder block using a scraping tool. – – Remove remaining sealant at oil pan using a rotating brush, e.g. a drill with plastic brush attachment (wear protective glasses). Clean sealing surface. They must be completely free of oil and grease. Installing Notes: – Note expiration date for sealant. – The oil pan must be installed within 5 minutes after application of silicon sealant.