Home Tips & Tricks 2004 GMC Sierra 1500 2WD Trim Panel Replacement – Side Front Door...

2004 GMC Sierra 1500 2WD Trim Panel Replacement – Side Front Door (With YE9 Early Production)

117
Download Trim Panel Replacement – Side Front Door (With YE9 Early Production) Removal Procedure 1. Remove the door handle bezel. 2. Remove the door trim panel upper extension. 3. Using a suitable flat-bladed tool, gently pry the manual lock lever from the door trim panel. 4. Remove the trim panel screws. Remove the screw (2) from within the opening where the manual door lock lever resides. Remove the screw (3) from the opening in front of the armrest. 5. Carefully slide the trim panel up in order to release the retainers from the door. 6. Disconnect the electrical connectors. Installation Procedure 1. Connect the electrical connectors. 2. Carefully align the panel, and slide the panel into the retainer slots in order to install the trim panel to the door. Notice: Refer to Fastener Notice in Service Precautions. 3. Install the trim panel screws (2,3). Tighten the trim panel screws (2,3) to 2 N.m (18 lb in). 4. Install the manual lock lever to the trim panel. 1. Align the manual lock lever to the opening in the door trim panel. 2. Push inward until the manual lock lever is fully seated into the trim panel. 5. Install the door trim panel upper extension. 6. Install the door handle bezel.