Home Tips & Tricks Engine Control Module Service Manual 08 Toyota Corolla

Engine Control Module Service Manual 08 Toyota Corolla

142
Download Engine Control Module Service Manual 08 Toyota Corolla – Removal and Installation REPLACEMENT 1. DISCONNECT BATTERY NEGATIVE TERMINAL 2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY a. Remove the screw from the glove compartment door stoppers. b. Deform the upper part of the glove compartment door assembly to release the stoppers. 3. REMOVE ECM a. Remove the ECM cover from the ECM. 5. REMOVE ECM BRACKET (DELCO MADE) a. Remove the 4 screws, then remove the ECM bracket. 6. REMOVE ECM BRACKET (DENSO MADE) a. Remove the 2 screws, then remove the ECM bracket. 7. REMOVE ECM BRACKET NO.2 (DENSO MADE) a. Remove the 2 screws, then remove the ECM bracket No. 2. 8. REMOVE ECM BRACKET NO.3 (DENSO MADE) a. Remove the 2 screws, then remove the ECM bracket No. 3. 9. INSTALL ECM BRACKET NO.3 (DENSO MADE) a. Install the ECM bracket No. 3 with the 2 screws. Torque: 3.2 Nm (33 kgf.cm, 28 in.lbf) 10. INSTALL ECM BRACKET NO.2 (DENSO MADE) a. Install the ECM bracket No. 2 with the 2 screws. Torque: 3.2 Nm (33 kgf.cm, 28 in.lbf) 11. INSTALL ECM BRACKET (DENSO MADE) a. Install the ECM bracket with the 2 screws.