Home Tips & Tricks FORD EXPEDITION 3 INSTALLATION INSTRUCTIONS 2003-2006

FORD EXPEDITION 3 INSTALLATION INSTRUCTIONS 2003-2006

103
Download STEP 1. Read instructions completely before beginning. STEP 2. reinstalled. Make sure nut plate in frame stays aligned with holes. STEP 3. FIGURE2. Go to step 6. VEHICLES WITHOUT TOW HOOKS STEP 4. u-bolts using M10 fasteners as shown. SEE FIGURE 4.Hand Tighten. STEP 5. brackets are properly aligned and tighten all fasteners. Recommended torque values are 20 Ft/Lbs. for M10 fasteners. Remove the contents from box and check for damage. Verify all parts are present. Remove tow hooks by removing front and rear bolts. NOTE: Tow hooks will not be Position bottom bracket up to bottom of frame and replace tow hook bolts. SEE Insert u-bolt in frame as shown. Attach Bull Bar to mount brackets using M10 fasteners. Make sure Bull Bar and