Home Tips & Tricks GMC AIRBAG STEERING WHEEL REPLACEMENT PROCEDURES

GMC AIRBAG STEERING WHEEL REPLACEMENT PROCEDURES

99
Download This wheel will fit the following vehicles: (equipped with spoke mounted switches): Cadillac – 2003-06 Escalade, Escalade EXT and Escalade ESV Chevrolet/GMC – 2002-08 Trailblazer/Envoy 2003-06 Silverado/Sierra Pickups and Avalanche 2003-06 Suburban/Yukon XL 2003-06 Tahoe/Yukon and Denali 2003-06 Express/Savana Vans Hummer – 2003-06 H2 Oldsmobile – 2002-04 Bravada DISABLING AND REMOVAL OF THE AIRBAG MODULE 4. Lift and partially remove the airbag module from the steering wheel in order to expose the electrical connectors on the back side. Take care not to pull on any of the wiring. See Illustration 2 above. 5. The airbag electrical connections have a safety locking connector-position assurance (CPA) clip that must be disconnected before you can remove the electrical connectors from the module. 6. Disconnect the electrical connectors from the airbag module. 7. Remove the airbag module from the steering wheel and place the module face up on the floor, seat or work bench. If you carry the module make sure the trim cover is pointed AWAY from your body. REMOVING THE STEERING WHEEL FROM THE VEHICLE