Download Use this option to program new Plips (remote button keys) for the vehicle so that they will operate the locks and alarm. All existing Plips will be erased from the Immobiliser memory at this point. You must then press the lock button on the Plip repeatedly until the Horn sounds. This indicates that the Immobiliser has stored the Plip. The Plip code must be read successfully 8 times before it is stored, so it will be necessary to press the lock button at least 8 times before the horn will sound. Repeat this procedure for all Plips to be programmed, and press the ENTER key on the Multi-Tester Pro when finished. N.B. Because all existing Plips are erased at the start of this procedure, you must re-learn any existing Plips that you still wish to use with the vehicle. It is therefore important that you have all the keys for the vehicle to hand before beginning this procedure.
Home Tips & Tricks Remote Fob Programming (Plips) – Land Rover Freelander, Defender and Discovery Series